26 lbs per day /1.1 lbs per hour. Cleaning and Maintaining Your Ice Maker.
Before using your ice maker, it's strongly recommended to clean it thoroughly. This ice maker comes with a Self-Cleaning function. You can also clean it yourself by following the steps below. Unplug the unit before cleaning or doing any maintenance.
Take out the ice basket. Clean the interior with: diluted detergent, warm water, and a soft cloth. Then, rinse the inside parts with water. Once rinsed, drain out the water by unplugging the drain cap at the front bottom side.The outside of the ice maker should be cleaned regularly with a mild detergent solution and warm water. Dry the interior and exterior with a clean soft cloth. When the machine is not in use for a long time, drain water completely out and dry the interior. Zstar ice cube makers adopt premium finned cooler, it has large heat dissipation area, and high cooling efficiency. Just 6 minutes to get 9pcs of bullet-shaped ice-cubes per cycle and up to 26lbs of ice in 24 hrs. Food grade liner, no abnormal odour, rest assured use. Easy to use with simple control panel.
Just add water, select the ice size(S and L are optional), it is ready to work. When there is not enough water Or when the ice bucket is full, the indicator will light up, reminding you to add more water or to remove the extra ice cubes. Thickened foaming layer ensure a good insulation effect, ice will not melt within 5-8hours at normal temperature. Stainless Steel Shell & Compact Design. Measuring at 22.2(D)29.4(W)29(H) cm, our ice maker makes you take it easily with the top handle.And this also makes it a great choice for home, kitchen, office, coffee shop, parties, bar or even RV travelers where space is at a premium, but still, need ice on demand. The material of stainless steel provides a longer service life.
Low Noise & Easy to Clean. The ice maker has a powerful compressor, high-quality condenser, and environmentally friendly R600a refrigerant with low noise, fast cooling, and low consumption. The durable stainless steel housing is smooth and easy to Clean. There is a spout and drain plug at the bottom for easy emptying of unused water.
Note: Please leave the machine upright for 24 hours before using it for the first time. Read the user manual thoroughly before using the product. After receiving the product, please let it stand upright steadily on a flat and stable for 2-4 hours before turning it on. Please do not turn the ice maker upside down or tilt it more than 45° during transportation or use.
If in any case, it happens, level and let it stand upright for at least 2 hours before you plugin and use the unit again. The first 1-3 batches of ice cubes might not be in perfect status and may not be made as quickly. Give it time to get to run stably. AUTOMATIC SELF-CLEANING PROGRAM : Plug on the unit, press "ON/OFF"button on control panel for more than 5 seconds, to enter the self-Cleaning program need 30 minutes, the "S, L" indicator flashes in turn during cleaning. After cleaning, Drain the water from the inner tank through the drainage outlet at the bottom of the machine.An ice maker is not a freezer, it does not keep the ice frozen. Use ice immediately or keep them in the freezer.